12 Tags of Christmas…{day 8}

Tag-8

supplies: craft sheet, distress inks, distress embossing ink, black embossing powder, ink blending tool, archival ink/jet black, heat tool, mini mister, glossy accents (ranger); grungeboard basics/plain, hitch fastener, word keys, jump rings , metal corners (idea-ology); scissors, craft pick, craft scratcher, paper distresser (tonic); festive sounds/lamp/music, fabulous flourishes santa's wish/holly (stampers anonymous); #8 tag, vellum, glue stick, bells, ribbon, foam tape
DSC00033
step 1: stamp music on a piece of vellum with archival ink.
DSC00034
step 2: dry the ink with a heat tool.
DSC00035
step 3: generously ink the vellum with old paper distress ink using an ink blending tool.
DSC00036
step 4: this is the step that changes the pliability of vellum into the crunchy feel of vintage parchment paper. – i use this technique all of the time – just be sure to do this in a well ventilated area, not for any fumes, just smoke…he
at the inked vellum with your heat tool.  the paper will start to smoke which is the distress ink basically being baked into the paper – don’t worry.  once the ink is dry, let the vellum cool.
DSC00037
step 5: tear around the stamped image – you’ll notice the paper is pretty rigid at this point.
DSC00038
step 6: ink the edges with a dark brown distress ink using an ink blending tool.
DSC00044
step 7: ink tag with antique linen distress ink using an ink blending tool.
DSC00045
step 8: ink random areas of the tag with frayed burlap distress ink using an ink blending tool.
DSC00046
step 9: spray water in your hand with a mini mister.
DSC00047
step 10: flick the water droplets on to the inked tag.
DSC00048
step 11: dry the water droplets with a heat tool.  you'll notice that the water droplets will react with the distress ink and create a faux bleach look.
DSC00049
step 12: drag a paper distresser along the edge of the tag to tatter it.
DSC00050
step 13: drag the scratcher tool across the front of the tag to make random scratches and wear out some of the background paper.
DSC00052
step 14: ink the edges and front of tag with dark brown distress ink using an ink blending tool.  check out
the scratched effect!
DSC00054
step 15: stamp portions of the fab.flourish on the tag.
DSC00040
step 16: stamp the lamp post on plain grungeboard with clear distress embossing ink.
DSC00041
step 17: apply black embossing powder over the image. replace excess back in jar.
DSC00042
step 18: heat emboss the image with a heat tool until the image becomes shiny.  *grunge will curl slightly and that’s okay.
DSC00043
step 19: cut out the design with sharp scissors.
DSC00053
step 20: ink the edges with distress ink using an ink blending tool.
DSC00055
step 21: stamp holly image on grungeboard with distress ink. heat ink to dry.
DSC00056
step 22: cut out image with sharp scissors.  *i cut the holly apart to use 2 pieces.
DSC00057
step 23: ink the edges of the holly with distress ink using an ink blending tool.
DSC00058
step 24: shape the music paper by curling the bottom end by rolling it towards the back.  repeat this for the top going in the opposite direction.
DSC00059
step 25: apply a light application of glue stick to the tag.
DSC00060
step 26: press the middle section of the vellum to the tag leaving the curled edges free.  *i use a glue stick since it’s a drier adhesive and won’t show much through the vellum.
DSC00061
step 27: apply foam tape to the back of the lamp.
DSC00062
step 28: remove the backing and press it on to the tag and adhere the holly pieces to the lamp with a small amount of glossy accents. *embellish the holly with ribbon and bells if desired.
DSC00063
step 29: place a word key next to the lamp to determine placement.  place a hitch fastener above the key for placement as well.
DSC00064
step 30: using a craft pick, pierce a hole through the tag where you want to attach the hitch fastener.
DSC00065
step 31: create a larger opening with the craft pick for the screw of the hitch fastener as shown.
DSC00066
step 32: insert the screw post of the hitch fastener through the bag of the tag through the hole.
DSC00067
step 33: screw on the top hitch of the fastener.
DSC00068
step 34: attach a small jump ring though the word key.
DSC00069
step 35: attach another small jump ring through the first jump ring as shown.
DSC00070
step 36: holding both sides of the top jump ring, press it over the top of the hitch fastener.
DSC00071
step 39: with pliers, squeeze the open jump ring closed.  * embellish the tag with ribbon and metal corner.
Detail-tag-8
in the details: i really like the look and feel this faux parchment paper creates on the festive sounds tag.  accented by a word key that can actually hang off of the tag from a hitch fastener really sets off the entire look.  the grungeboard lamp ties everything together…t!m

Tim Holtz Creative Chemistry 101