12 Tags of Christmas…{day 7}

Tag-7

supplies: craft sheet, distress inks, distress embossing ink, distress stickles, ink blending tool, paint dabber/snow cap, mini mister, gold embossing powder, heat tool (ranger); mask sheets, mini pin, philosophy tag (idea-ology); staz-on (tsukineko); retro holiday/santa/merry christmas, fabulous flourishes, festive sounds/music, mini holidays/snowflakes (stampers anonymous); scissors (tonic);  #8 tag, ribbon

DSC00001
step 1: to create your custom mask of an image, read the package of the mask sheet to make sure you’re working the the sheet that is labeled “mask”.  stamp your image with staz-on ink and let it dry – do not heat it or the mask will melt.  *i’ve tried just about every ink, and this is the only ink that will dry on the mask sheets.  another cool thing is that you can die cut these masks or punch out designs.

DSC00002
step 2: once your stamped image is dry cut it out with non-stick scissors.
DSC00003
step 3: remove the mask backing and discard it.  now you have exposed the re-positionable adhesive of the mask.
DSC00005
step 4: place the mask on the included clear storage sheet until we’re ready to use the mask.
DSC00006
step 5: stamp the santa image with archival ink on a tag and dry it with a heat tool.
DSC00007
step 6: position your custom mask directly over the stamped image. *you might be thinking that a good ol’ post-it note would do the trick for this, but the mask sheet will not only last longer, but allows you to line it up perfectly and event more important, to see what you’re doing ink-wise.
DSC00008
step 7: working on a craft sheet, apply snow cap paint dabber to the fab/flourish stamp.
DSC00009
step 8: stamp the entire fab.flourish on the tag as shown.
DSC00010
step 9: gently peel the mask back and remove it from the tag.
DSC00011
step 10: place the mask on your craft sheet and wipe it clean with water.  the stamped image will be fine.
DSC00012
step 11: dry the paint stamped image on the tag with a heat tool. *make sure you've removed the mask first!
DSC00013
step 12: begin inking the tag with a light color of distress ink to put a base of color down using an ink blending tool.  *i work with antique linen and as i ink i make sure i am not inking directly in the center of the santa, it creates a highlight effect later.
DSC00014
step 13: ink around the tag with the brighter tones of distress using an ink blending tool.  * i used fired brick and peeled paint around the santa face. let the inks dry completely.
DSC00015
step 14: re-apply the mask over the santa, you’ll see how we now have a little bit of blended color under the mask which is great so the image doesn’t look so “cookie-cutter”.
DSC00016
step 15: ink over the tag with darker shades of distress ink using an ink blending tool. * i i used aged mahogany and pine needles
DSC00018
step 16: stamp music notes with black soot distress ink over the tag.  *be sure to use distress and not archival for this step.
DSC00019
step 17: stamp snowflakes with black soot distress ink.
DSC00020
step 18: wipe off the excess distress ink from the santa mask on the tag to see how how much contrast your background has.  if you’re happy with it, let’s move on.
DSC00021
step 19: mist paper towel with water from a mini mister.
DSC00022
step 20: blot – do not wipe – over the stamped flourish image with the damp paper towel to remove all of the distress ink color you’ve applied to the tag including the stamped images and reveal the white paint dabber.  *distress ink and paint dabbers are not compatible so the paint works as a resist.
DSC00023
step 21: gently peel off the mask from your tag.  wow!
DSC00024
step 22: make sure your tag is dry first.  stamp merry christmas with distress embossing ink.
DSC00025
step 23: apply gold embossing powder over the image and remove excess powder.
DSC00026
step 24: heat emboss until the metallic gold melts into liquid beauty!
DSC00027
step 25: apply peeled paint distress stickles to the holly on santa’s hat.  make sure you spread the stickles around with the tip of the bottle.
DSC00028
step 26: apply small dots of fired brick distress stickles for berries.  dry everything with a heat tool and embellish tag with ribbon, mini pin, and a philosophy tag.
Detail-7
in the details – the shimmer of the distress stickles against the contrast of the white paint dabber flourish is such a dramatic effect on this tag.  very simple, yet cool effect…t!m

Tim Holtz Creative Chemistry 101