the holidays are in full swing and the studio is buzzing with festive creativity. i hope the final tag of the year will inspire you to take time during this busy holiday season to give these ideas a try. we start by transforming plain burlap into a colorful patterned masterpiece, then layer punched paper shapes into yuletide evergreen, and finish everything off with a few findings and a splattering of distress to create a winter wonderland. here’s wishing you all a creative and magical christmastime…t!m
supplies:
- surfaces: textured surfaces/burlap, #8 manila tag, kraft core
- embellishments: jingle brads, chitchat stickers/occasions, crinkle ribbon, mirrored stars
- distress ink: ground espresso, walnut stain
- distress spray stain: fired brick
- distress paint: picket fence
- alcohol ink: mushroom
- punches: pine, juniper, laurel
- die: decorative strip bow tied
- tools: layering stencil/THS032, distress splatter brush, sanding grip, ink blending tool, craft sheet, tiny attacher, scissors, vagabond
- adhesives: hot glue, glossy accents
- misc: pencil, sewing machine, power punch, paper towels
step 1: start by cutting a tag shape from a sheet of textured surfaces burlap and punch a hole through the top using a power punch (or crop a dile).
step 2: place just the burlap tag shape on a paper towel and position layering stencil over the top.
step 3: ink over the stencil using distress spray stain – do not use too much stain or it will seep through the stencil.
step 4: place a dry paper towel over the stencil to blot off the excess stain before removing the stencil.
step 5: lift the stencil off of the background to reveal your patterned burlap and let inks dry or dry with a heat tool.
step 6: remove the adhesive backing from the burlap (my favorite thing about textured surfaces is that they are all adhesive backed).
step 7: adhere the “printed” burlap to the manila tag.
step 8: ink the edges of the tag with distress ink using an ink blending tool.
step 9: select several colors of kraft core cardstock for the greenery and bow.
step 10: sand the kraft core (on a surface other than your craft sheet) using a sanding grip.
step 11: punch one design per color of cardstock. note: if you alternate the punch you can get more punched from a strip.
step 12: lightly ink the edges of all punched shapes with distress ink using an ink blending tool.
step 13: trace a circular shape on the burlap with a pencil.
step 14: gently scrunch and crumple the punched shapes to give them dimension.
step 15: start at the bottom center of the circle and adhere your pieces with hot glue.
step 16: layer each piece by slightly stacking it over the previous one working your way around the circle.
step 17: repeat the same process for the other half of the circle changing direction of the shapes.
step 18: once you’ve made it to the top of the wreath, leave a gap for the bow.
step 19: die cut the smallest bow and center strip from the bow tied die.
step 20: ink the edges of cut pieces with distress ink using an ink blending tool.
step 21: accordion fold the bow on the small areas using your fingers and hold in the center as shown.
step 22: secure the center with a single tiny attacher.
step 23: once the bow is secure, gently pull the ends of the bow down.
step 24: wrap the center strip around the middle of the bow to cover the tiny attacher and glue the ends in the back.
step 25: give your paper bow character and shape by indenting the edges with your fingernail. adhere the bow to the top of the wreath.
step 26: cut the ends off a few small jingle brads (i know kinda defeats the purpose right?).
step 27: adhere the bells to areas of the wreath with hot glue.
step 28: for a snowy effect, add some white distress paint using the distress splatter brush.
step 29: select a festive quote from the seasonal chitchat stickers, cut the quote in sections, and snip one end of each into a flag.
step 30: sand the edges of the stickers to reveal the white core.
step 31: adhere the stickers to the burlap tag using glossy accents.
step 32: proof that i figure things out as i go, i decided to add some stitching to my tag using my sewing machine (at least this way it was definitely more random which i like).
step 33: tint a mirrored star by dripping mushroom alcohol ink over it and blot off the excess with a paper towel.
step 34: adhere the perfectly vintaged star to the burlap with hot glue.
the details: hard to believe this tag started as plain burlap and some strips of colored cardstock. i love the patterned background and the amazing dimension paper punches give this tag.
the 12 tags of 2015 have been packed with techniques all year long.
so if you’re looking for a convenient way to the have creative inspiration at your fingertips, i’ve created a digital download of all 12 months of tutorials with over 80 pages and 400+ photos!
check out my etsy shop to purchase the download (click here).
Pin It to Remember It!
congrats to the winners from the november 12 tags of 2015. if you see your name (and it links to your tag), please email [email protected] to claim your prize…
1. Nonnie’s Musings
2. Synnøves Papirverksted
3. Susan Janicula
4. Monika Gulyas
5. Diana Fernandez
6. Anne R
7. Sandra M
8. Patti Dee
9. Sadie
10. Angela Venable
11. Brandy W
12. Margikscrap
*be sure to check your local stores for these supplies or you can click the links below to purchase online with a discount of 10% off your purchase – use the following code with your order: 10DECEMBERTH
